Distributiestraat 73
4283 JN Giessen

phone +31-(0)183-445050
mail info@mctec.nl

Bending Stiffness – Buigweerstand Tester

Dit toestel is geschikt voor het meten van de buigweerstand van diverse materialen. De meting wordt gedaan met een 2-punts buigmeting. Het toestel is eenvoudig te bedienen door het geïntegreerde touch screen. Drie meetpunten en een timerfunctie zijn  instelbaar.


Applicable standards:
VDA Prüfblatt 230-209 for Leather
ISO 2493
DIN 53121

• Specially developed high precision gear
• A ccording to ISO and TAPPI for the paper industry, and according to VDA for the automotive industry
• Touchscreen operation
• Display of individual values, graphs, statistic functions, and ratio

The device is easy to handle due to a user-friendly touchscreen operation system. The measuring procedure is visualized during the test. Graphs, single and statistic values are displayed immediately after the test. The sturdy housing is supported on special vibration absorbers. The acrylic glass cover protects against air drafts and other localised influences, which could falsify the test result when using low forces. Bending angle, angle speed, dwell time, and further values are pre-adjustable. Test methods are preset according to the standard. User defined test methods can be stored.

Test description
The operator places the sample. If using a manual device, it has to be tightened by use of a friction screw. When working with the pneumatic version, the sample is clamped automatically when the start button is pressed. The sample support releases the sample, which is now pressed against the bending knife of the force sensor. The chart is already displayed during the test. When reaching the preset bending angle, the sample rests for the preset dwell time and subsequently returns to its initial position.

The automated version automatically releases the sample. The test results and the chart are displayed. When performing MD and CD tests, the ratio is displayed.

• Accuracy: ± 1 % of the displayed value in the range of 2 per mill until nominal load of the force sensor
• Available force sensors: 2, 5, or 10 N
• Bending angle: 0-90°
• Angle speed adjustable from 0.5-50 °/sec
• Sample width: 38 mm (paper), 30 mm (leather and plastics)
• Clamps: alternatively pneumatic or manual
• 3 measuring points (angles) and one measuring time individually adjustable
• Display of single values, graphs, and statistics
• Control and data processing system with touchscreen operation (conforming to Windows©)
• RS 232 interface for result transfer and parallel printer interface for HP Laserjet compatible printer
• Compatible to MiniStat and PaperLIMS
• Emergency stop

Technical data
Electricity: 110–230 V, 50–60 Hz
Water supply: None
Compressed air: 400–600 kPa
Dimensions (WxDxH): 38x45x32 cm
Net weight: 27 kg
Gross weight: 37 kg

Meer informatie?

Neem contact met ons opplay_arrow