Productspecificaties
Applicable standards:
ISO 8791-4
ISO 891-1
TAPPI T 555
BS 6563
Features
• 2 versions available:
– 1 head, test direction: Topside (standard)
– Reverse test direction: Bottomside
• 3 backing pressures selectable: 490, 980, and 1960 kPa
Description
The sturdy and stable device is equipped with industrial PC and touchscreen and is available in three versions: 1 head (top), or 1 head (bottom). The large display indicates single values and statistics.
Test description
The operator places a sample below the measuring head. The measuring head lowers onto the sample after pushing the start button. The bottom platen with backing substrate is lifted and pressed against the measuring head with the preset pressure. Controlled measuring air is admitted to the measuring head and passes from one annular groove, between the sample and the measuring land to the other annular groove. The test takes approx. 5 seconds. The measured value (roughness depth) is displayed in μm after the performed test.
Specifications
• Selectable contact pressures:
– 490 kPa (only for compressibility tests)
– 980 kPa
– 1960 kPa
• Measuring range: 0.5-8 μm
• Display of results: roughness (=roughness depth) in μm
• Measuring accuracy:
– Pressure differential: ± 0.005 kPa linear
– Flow: ± 0.5 % of the final value
– Accuracy of test duration: ± 0.5 s
• Repeatability: ± 0.2 μm
• Reproducibility: ± 0.4 μm
• Measuring direction (depending on version):
– Topside
– Bottomside
• Touchscreen for easy handling
• Data Outputs: RS232, Parallel Print Port, XML Export, PTA Line Connect
Availabe Models:
S626000001 ModularLine PrintSurf (PPS) Roughness Top side
S626000002 ModularLine PrintSurf (PPS) Roughness Bottom side
Zubehör:
S626001002 Soft Backing Disc 1Stk
S626001003 Hard Backing Disc 1Stk
Technical Data
Connections: | |
power supply: | 110–230 V, 50–60 Hz |
water: | no |
compressed air | 400-600 kPa (4-6bar) filtered hose 6mm |
Data: | |
RS232 | Baud rate: 57600 8 Daten-Bits 1 Stopp-Bit no parity |
Ethernet | Data export (MQTT) |
USB | Service / updates |
Measurement: | |
measureing range: | 0,5-8µm |
result as: | roughness (=depth of roughness) in µm |
measureing accuracy | ± 1% of shown value |
differentialpressure: | ± 0,005kpa linear |
flow rate: | ± 0,5% of the final value |
typical measuring time | appx. 4 sec |
repeatability: | ± 0,2µm |
reproducibility: | ± 0,4µm |
System: | |
dimensions: (B/T/H) | 270 x 590 x 570 mm |
weight netto: | 53 kg |
Download PDF
pps-roughness-meter.pdfMeer informatie?
Neem contact met ons op