![](https://mctec.nl/wp-content/uploads/2024/06/urx1-intrinsically-safe-process-refractometer-in-line-analyzers.jpg)
URX1 – Intrinsically safe process refractometer
The URX1 digital refractometer is designed specifically for hazardous areas up to Zone 0: the equipment certificate is ATEX II 1 G – EEx ...
![](https://mctec.nl/wp-content/uploads/2022/05/Gurley-40450-1-587x440.jpg)
Air Permeability Tester – Gurley Tester
The digital air permeability tester according to Gurley consists of a robust cylinder with a pneumatic lifting and lowering mechanism. The start and s...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_18622-Luftberst-3_4-gros-330x440.jpg)
AIRMATIC BURST TESTER
For determination of bursting strength and bulging height of filter papers, elastic foils and aluminum foils. The burst tester is equipped with an ele...
![](https://mctec.nl/wp-content/uploads/2024/07/ABP-200-4AM-370x440.png)
Analytical balances
Highly precise laboratory balances for measuring mass, typically designed with an enclosed measuring pan to avoid the influence of dust and air curren...
![](https://mctec.nl/wp-content/uploads/2022/05/BauerMcNettFibreClassifier-40180-1-587x440.jpg)
Bauer McNett Fiber Classifier
For the classification of pulp by determining the fiber length. The fibre classifier is manufactured entirely from stainless ste...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_Bendtsen-3x4-gros-frei-farb-330x440.jpg)
Bekk Smoothness Tester
For the determination of smoothness on paper and board according Bekk method. Bekk smoothness testing is an especially informative technique for deter...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_Biege-Website-600x600-1-440x440.jpg)
Bending Stiffness Tester
Our Bending Stifness Tester determines the dynamic forces in a 2-point bending test. The device is easy to handle due to a user-friendly touchscree...
![](https://mctec.nl/wp-content/uploads/2022/05/bendsten-tester-modular-line-440x440.jpg)
Bendtsen Tester – Roughness & Porosity
For the determination of surface roughness and air permeance according to Bendtsen method. The Bendtsen measurement process is specified both for surf...
![](https://mctec.nl/wp-content/uploads/2022/05/brecht-hol-2-440x440.jpg)
Brecht-Holl Fractionator
For fiber fractionation according to Haindl, Brecht Holl and for recyclability measurement. The Braindl fiber fractionator made of corrosionresistant ...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_S18534_Berst0424_frei-414x440.jpg)
Burst Tester
For the determination of burst strength on paper and board. The specially developed housing, which comes as standard with user-friendly touch screen a...
![](https://mctec.nl/wp-content/uploads/2022/05/Canadian-Standard-Freeness-tester-1-440x440.jpg)
Canadian Standard Freeness Tester
For measuring the rate of drainage of pulp suspensions and expressing it in terms of Canadian freeness. The drainage chamber and filling chamber are m...
![](https://mctec.nl/wp-content/uploads/2022/05/chip-classifier-1-440x440.jpg)
Chip Classifier
Instrument for quick and reproducible determining the mean thickness and thickness distribution of wood chips intended for the production of chemic...
![](https://mctec.nl/wp-content/uploads/2022/05/Cobb-95933-1-587x440.jpg)
Cobb Oil & Water Absorption Tester
Cobb Tester for determination of oil- or water-absorption of paper or board. For the determination of the water absorption of sized pape...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_frei1-508x440.jpg)
COBB Water Absorption Tester
For determination of water absorption. The Cobb tester measures the amount of liquid that has been absorbed by paper or cardboard within a certain tim...
![](https://mctec.nl/wp-content/uploads/2022/05/Concentratiemeting-ProMTec-ICC2.45-2.jpg)
Concentration Measurement ICC 2.45
Concentration, Brix value and Density measurement. If you want to use multiple measurements, this proven system is the optimal solution. It is comp...
![](https://mctec.nl/wp-content/uploads/2022/05/ConcoraFluter-95961-1-587x440.jpg)
Concora Medium Fluter
The Concora medium fluter consists of a main case and a fluter case. The motor and controls are installed in the main case. Behind the safety cover of...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_Unbenannt-1-640x427.jpg)
Crush Resistance Tester
The crush tester has been specially developed for crush tests on various materials (paper, board, etc.) and is impressively simple to operate. Its rob...
![](https://mctec.nl/wp-content/uploads/2022/05/Desintegrator-95568-1-587x440.jpg)
Disintegrator
This robust, well-proven disintegrator is very simple to operate. The upper part of the unit is balanced and can easily be opened with just one hand i...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_Elmendorf-rechts-gros-330x440.jpg)
Elmendorf Tear Tester
Determines the tearing resistance of various materials. The Elmendorf tear tester has been developed specially for the paper industry and is outstandi...
![](https://mctec.nl/wp-content/uploads/2022/05/Equalizer-95555-1-587x440.jpg)
Equailizer
The distribution unit is made of robust stainless steel and light-weight acrylic glass. The smoothoperating motor (30 dBA) provides constant and consi...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_FCT-Kreisschneider-446x440.jpg)
FCT Round Sample Cutter
The circular cutter was specially developed for FCT tests in the compression tester and is used to produce samples with an area of exactly 100 cm². S...
![](https://mctec.nl/wp-content/uploads/2022/05/OT-FQA-360-1.jpg)
Fiber Quality Analyzer FQA-360
The FQA rapidly and accurately measures fiber length, width, curl, percentage numeric fines, and kink in dilute pulp samples. Optional software measur...
![](https://mctec.nl/wp-content/uploads/2024/06/63cf34956bc591828f578990_Guardian-1-640x427.jpeg)
Guardian-HD Web Profiling Series
Accurate Moisture, Coat Weight & Film Thickness Profile Measurement The Process Sensors Guardian-HD Web Profiling Series is a...
![](https://mctec.nl/wp-content/uploads/2022/05/Verseitag-Porosity-Tester-289x440.jpg)
High Porosity Tester (PTA-Line)
VERSEIDAG Air Permeability Tester, Version „PTA-Line“. Measures the air permeability of textiles and glass fibre fabrics. Available with s...
![](https://mctec.nl/wp-content/uploads/2024/07/6143-Hitachi-X-Supreme-8000-Benchtop-XRF-analyser-04-scaled-1-640x427.jpg)
Hitachi X-Supreme 8000 Benchtop XRF-analysator
For reliable quality control at the push of a button, The X-Supreme8000 is the ultimate benchtop XRF analyser for materials such as petrochemicals, po...
![](https://mctec.nl/wp-content/uploads/2024/07/humimeter_RH5-Papierhygrometer-fuer-Papierstapel_467x467px_titel-467x467-1-440x440.webp)
Humimeter RH Series – Schaller
The Humimeter RH Series is a quality line of paper moisture meters designed for fast, accurate, and non-destructive measurement of moisture in paper s...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_von-rechts_frei-587x440.jpg)
Internal Bond Sample Preparation Station
For preparing samples for the internal bond test. The Internal Bond Sample Preparation Station with its adjustable contact pressure and definable pres...
![](https://mctec.nl/wp-content/uploads/2022/07/LAB-X5000-foto-1-440x440.png)
Hitachi High-Tech Lab-X5000 – Benchtop XRF Analyser
The Hitachi High-Tech release of the LabX5000 bulk elemental analyzer provides significant updates to what was one of the most reliable elemental anal...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1__Valleybeater-Hauptfoto-364x440.jpg)
LABORATORY BEATER “VALLEY”
The Laboratory Beater Type Valley is used to grind pulp under standardized laboratory conditions. Pulp fibers in aqueous suspension move under control...
![](https://mctec.nl/wp-content/uploads/2022/05/laborrefiner-1-587x440.jpg)
Laboratory Refiner LR40
The laboratory refiner consists of a robust frame made of stainless steel, the sampling station with integrated scales, and the control panel. Inside ...
![](https://mctec.nl/wp-content/uploads/2024/07/large-sheet-in-speck-tor-a4-dirt-lsi-a4-dirt_l.jpg)
Paper Inspection for Dirt and Holes (LSI-A4-DIRT & HOLES)
The Large Sheet In-speck-tor-A4 (LSI-A4) measures both dirt specks and visible holes in pulp and paper according to ISO/CEN 5350-4, TAPPI T563, and PA...
![](https://mctec.nl/wp-content/uploads/2024/07/domtar-lint-tester_l.jpg)
Lint Tester – OpTest
This device provides a simple and economical means to measure and characterize lint or other offset blanket debris. In the press room, linting...
![](https://mctec.nl/wp-content/uploads/2022/05/MM-LR02-2-396x440.jpg)
LR02 Lab Refractometer
The LR-02 refractometer has been designed to be accurate, robust, compact and easy to use both in the laboratory and out at the line. Thanks to its ba...
![](https://mctec.nl/wp-content/uploads/2022/05/LR05-lab-refractometer-prod-v1.jpg)
LR05 – Laboratory Refractometer
The LR05 laboratory refractometer has been designed to be accurate, robust andeasy to use. The project has been developed using state of the art techn...
![](https://mctec.nl/wp-content/uploads/2022/05/MCT460-1.jpg)
MCT460 Online NIR Smart Sensor
Rapid, continuous product analysis is critical in all manufacturing processes. To maintain consistent product quality, increase yield, maximize eff...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_Farmessgeraet_ML-3x4_gross_ohne_Hintergrund-330x440.jpg)
ML Spectro Analyzer
For measuring ISO whiteness, color, color differences, fluorescence and opacity. The ModularLine Spectro Analyzer color and whiteness t...
![](https://mctec.nl/wp-content/uploads/2024/07/DAB-100-3_0001.png)
Moisture Analyser DAB Series
Particularly user-friendly moisture analyser with high-quality infrared or halogen quartz glass heater. This product is ideal for taking quick moistur...
![](https://mctec.nl/wp-content/uploads/2024/06/65e747a55b3640cbbe8bea74_NIR-7000-Hero-slightangle-p-500-444x440.jpg)
NIR-7000 Online Moisture Sensor
Industrial-Grade Continuous Online Moisture Monitoring Sensors The KPM Analytics’ NIR-7000 is a continuous online near infrar...
![](https://mctec.nl/wp-content/uploads/2022/05/OT-PPF-1.jpg)
OpTest Formation Tester PPF
Our PaperPerfect Formation Tester is developed at the McGill University in Canada. The developed the technology to characterize the ...
![](https://mctec.nl/wp-content/uploads/2022/05/OT-MicroScanner-1.jpg)
Micro-Scanner – Advanced Visual Analysis
The Micro-Scanner measures visible dirt with the correct illumination and automatic thresholding according to Tappi Test Method T563 and ISO 5350-4, r...
![](https://mctec.nl/wp-content/uploads/2024/07/optest-mottle-analyzer-oma_l.png)
OpTest Mottle Analyzer (OMA)
The OpTest Mottle Analyzer (OMA) revolutionizes the measurement of print and coating mottle! Using advanced wavelet algorithms, the OMA quickly quanti...
![](https://mctec.nl/wp-content/uploads/2024/07/optisurf_l.jpg)
OpTiSurf – Optical Roughness
The OpTiSurf uses advanced optics and algorithms to quickly quantify the optical roughness of sheets. OpTiSurf is more objective compared to air-leak ...
![](https://mctec.nl/wp-content/uploads/2024/07/PMSA_Papier-Einzelblattfeuchtemessung_467x467px_titel-467x467-1-440x440.webp)
PMSA paper cut sheet moisture sensor
At-line moisture analyser with PC software for determination of water content of single paper sheets The PMSA is a laboratory instrument for the deter...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_14407517991089-587x440.jpg)
Pneumatic Sample Punch
For punching samples pneumatically. The punch for preparing samples for Elmendorf, twin folding or bending tests is a robust table device that operate...
![](https://mctec.nl/wp-content/uploads/2022/05/Parkerprintsurface-tester-440x440.jpg)
PPS- Parker Print Surface Roughness Tester
For Measuring roughness according to the Print Surf method. The print surf method is a technique for determining the surface ro...
![](https://mctec.nl/wp-content/uploads/2024/07/DAB-100-3_0003-1.png)
Precision Balances
This product line, consisting of almost 120 models, offers an extensive range of precision balances to meet various weighing needs. The models vary co...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_SoftwarePCDrucker-kopie-640x436.jpg)
Probenet Software
The ProbeNet software by FRANK-PTI is a software programme for the centralised collection of measurement data from different laboratory measurement eq...
![](https://mctec.nl/wp-content/uploads/2022/05/PTA-Control-62000-1-587x440.jpg)
PTA-Line Control & Transport Unit
The ModularLine control and transport unit is the heart of an automated testing system. As its name indicates, it regulates the sample feed that trans...
![](https://mctec.nl/wp-content/uploads/2022/05/Glossmeter-440x440.jpg)
ML Gloss Meter
Laboratory automation for 2 or more testing devices. The ModularLine gloss tester uses the latest LED technology, which not only significantly increas...
![](https://mctec.nl/wp-content/uploads/2022/05/PTA-Micrometer-62200-1-587x440.jpg)
PTA-Line Micro meter
To determine the single layer thickness of paper, board, textiles and fibrous textile fabric, the ModularLine micrometer is outstanding thanks to its ...
![](https://mctec.nl/wp-content/uploads/2022/05/PTA-Tensile-62700-1-587x440.jpg)
PTA-Line Tensile Tester
In contrast to other techniques for determining tensile strength, the ModularLine tensile strength test device is a fully-fledged measurement device a...
![](https://mctec.nl/wp-content/uploads/2024/07/pulp-brightness-reversion-apparatus_l.jpg)
Pulp Brightness Reversion Apparatus – OpTest
The PBRA is used in studies to optimize both cooking and bleaching processes of pulp. The device can also be used for quality control of the pulp mill...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_150810Durchstosprufgerat-481x440.jpg)
Puncture Tester
For measuring the energy absorption by dynamically puncturing board or corrugated board. The digital, fully automatic puncture tester with a pendulum ...
![](https://mctec.nl/wp-content/uploads/2022/05/Cutter-95102-1-587x440.jpg)
Round Sample Cutter
For cutting circular samples to determine the grammage. The manual circular cutter, with 4 built-in special blades, cuts circular samples to 100 cm² ...
![](https://mctec.nl/wp-content/uploads/2022/05/SamplePunch-95937-1-587x440.jpg)
Manual Round Sample Punch
For punching round samples of 100cm² for grammage and more. The robust round sample punch is mounted on a heavy, bonded plywood base. With the hand l...
![](https://mctec.nl/wp-content/uploads/2022/05/Cutter-95809-1-587x440.jpg)
Sample Strip Cutter
WITHOUT SIDE GUIDE: Universal sample strip cutter is used to cut sample strips of various widths. The integrated clamping mecha...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_CUT7-330x440.jpg)
Sample Strip Cutter Cut7
Special double knife cutter for thinnest papers and foils. The Cut7 cuts paper from 8 g / m² and is used for the thinnest papers (8-30g / m²). Even ...
![](https://mctec.nl/wp-content/uploads/2022/05/SchopperRiegler-95586-1-587x440.jpg)
Schopper Riegler Freeness Tester
For the determination of the degree of refining (beating) of a pulp suspension in water and expressing it in terms of the Schopper-Riegler (SR) num...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_DSC_0021_frei-440x440.jpeg)
Scott Bond Tester
For the determination of the internal bond strength of paper and board. The Internal Bond Tester is used to determine the internal bond of paper and b...
![](https://mctec.nl/wp-content/uploads/2024/07/CR100-web-550x440.jpg)
SenWare CR100 Color Monitor
The SenWare CR100 Series offers advanced, versatile colour monitoring systems designed for diverse industrial applications. With robust on-line, labor...
![](https://mctec.nl/wp-content/uploads/2022/05/RapidKothenAutomatisch-95854-1-587x440.jpg)
Sheet Former Rapid Köthen Automatic
The machine consists of a strong stainless steel table with a waterproof polypropylene working top, a built-in sheet forming column, 1 to 5 dryers,...
![](https://mctec.nl/wp-content/uploads/2022/05/RapidKothenKWT-95854-4-587x440.jpg)
Sheet Former Rapid Köthen KWT
For the production of standardized hand sheets with a diameter of 200 mm and to enrich the white water with chemicals from suspension. The warp r...
![](https://mctec.nl/wp-content/uploads/2022/05/RapidKothenHandmatig-95854-1-587x440.jpg)
Sheet former Rapid Köthen Manual
For the production of standardised hand-sheets with a diameter of 200 mm. The warp resistant stainless steel frame is a robust b...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_Blattpresse-330x440.jpg)
Sheet Press acc. to Tappi and Scan
For the de-watering and pressing and hand-sheets produced on sheet formers acc. to TAPPI or SCAN. The sheet press consists of two parallel plates, whi...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_SCTfrei1gros-587x440.jpg)
Short Span Compression Tester (SCT)
The short span compression tester has been developed specially for the paper industry and has exceptional ease of use and high measurement accuracy. I...
![](https://mctec.nl/wp-content/uploads/2022/05/SommervilleShiveContentAnalyser-40170-1-587x440.jpg)
Somerville Shive Content Analyzer
For determination of shive content in pulp. The Somerville shive content analyser consists of a robust stainless steel frame, a...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_Spectro-Analyzer_gros_3x4-330x440.jpg)
Spectro Analyzer
For determination of ISO brightness, color, color differences, fluorescence and opacity.The Spectro Analyzer perfectly meets requirements for fast and...
![](https://mctec.nl/wp-content/uploads/2024/06/v@1_Spectro-Analyzer_gros_3x4-330x440.jpg)
Spectro Analyzer
For determining ISO brightness, colour, colour differences, fluorescence and opacity. The Spectro Analyzer perfectly meets the requirements for fast a...
![](https://mctec.nl/wp-content/uploads/2022/05/SpeedDryer-40150-1-587x440.jpg)
Speed Dryer
For the quick drying of pulp and hand sheets. The speed dryer consists of a robust stainless steel lower part with fitted hotplate and a safety cover....
![](https://mctec.nl/wp-content/uploads/2022/05/PTA-SonicSheetTester-63100-1-587x440.jpg)
SST – Sonic Sheet Tester
The ModularLine sonic sheet tester is used wherever the characteristics of a material in further processing must be predicted. These range from simple...
![](https://mctec.nl/wp-content/uploads/2022/05/ST-3300-1-scaled-1-353x440.jpg)
ST-3300 Smart RF Sensor
Smart RF Moisture Analyzer for Industrial Manufacturing The Sensortech ST-3300 is a smart analyzer for process moisture measure...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_PunchandDie-469x440.jpg)
Strip Punch „PUNCH & DIE“-PRINCIPLE
The robust strip punch functions according to the “punch & die” principle and consists of an upper and lower blade which punch the sample. A long ...
![](https://mctec.nl/wp-content/uploads/2022/05/Tambour-Cutter-2-587x440.jpg)
Tambour Cutter
Turn the cutter unit for cutting from the desired side (normally the drive side). Connect the charged battery. Adjust the height of the cutter to a su...
![](https://mctec.nl/wp-content/uploads/2022/05/TensileTesterHorizontal-81502-1-587x440.jpg)
Tensile Tester Horizontal
For an accurate and fast measurement of all parameters with dry and wet samples of paper, board and tissue. FRANK-PTI’s horizontal tensile tester is...
![](https://mctec.nl/wp-content/uploads/2022/05/tensile-tester-440x440.jpg)
Tensile Tester Vertical
For various tensile and pressure tests. The universal tester has been specially developed for different tensile and pressure tests on various material...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_Absorption-Testerfreiklein-e1718795661603.jpg)
Tissue Absorption Tester
For the determination of the water absorption time and water absorbency of tissue. The absorption tester is manufactured from robust stainless steel. ...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_DSC_0272_bearbeitet_frei-4x3-gros1-587x440.jpg)
Twin Folding Tester – Folding Endurance
For the determination of the folding endurance on paper and board following the Louis.Schopper system. The twin folding tester consists of a robust ca...
![](https://mctec.nl/wp-content/uploads/2022/05/v@1_Micrometer-2023-330x440.jpg)
Universal Micrometer
For the precise determination of thickness of paper, board, corrugated board, nonwovens, foil and textile. The universal micrometer consists of a warp...
![](https://mctec.nl/wp-content/uploads/2022/05/MM-UR24-1.jpg)
UR24 – In-line process refractometer
The UR24 digital refractometer is a stand-alone unit designed for simple installation in-line or in a tank. The analyzer provides a continuous measure...
![](https://mctec.nl/wp-content/uploads/2024/07/v@1_Wasserruckhalte1-640x427.jpg)
Water Retention Centrifuge
For the determination of the water retention capacity of pulp samples. Centrifuge with 4 receptacles for dewatering containers. Dewatering containers ...
![](https://mctec.nl/wp-content/uploads/2024/07/WMQ_screen-588x440.jpg)
Watermark Quality Analysis Software (WQA)
The OpTest "Watermark Quality Analysis Software" revolutionizes the way in which papermakers may optimize watermark quality! Using advanced algorithms...